Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium totam rem aperiam, eaque ipsa quae
ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernaturs aut odit aut fugit sed quia consequuntur magni doloresx
yghhgfjtdriu56eo9in vfyc vthrsjn
Product can be customized according to Buyer’s Requirement
Dewaxed bleached shellac is processed from bleached lac, where the wax of the lac is removed with the help of various solvents. Dewaxed bleached lac India is a food grade material which is often used to protect and extend a product’s non-refrigerated shelf life. Shreemoni Exports supplies various grades of dewaxed bleached shellac, with impurity as low as 0.2% in the manufactured product
Bleached shellac is a colourless natural resin processed from lac. Bleached shellac India is bio-degradable without any non-toxic properties. We supply pure bleached shellac in powdery form; a careful multistep manufacturing process allows to control the quality of the finished product according to the requirement. You will find the finest bleached shellac at the most affordable prices at Shreemoni Exports.
Aleuritic acid is an essential component of pharmaceutical and perfume industry. Processed while manufacturing shellac flakes India, it is one of our primary export items to many of our customers. This product contains 99% purity, which is essential for synthesising various products like Ambrettolide, Exaltone, Civetone, etc.
Shreemoni Exports is always committed to export various grades of high-quality seedlac to our customers. We procure the raw materials from some of the best producers in the region, processing near the lac-growing sites to ensure maximum retention of the product. Efficient processing allows us to yield 40% to 60% conversion of the raw materials to finished product.
Dewaxed Orange Shellac is a pure form of shellac, which is suitable for paint and varnish with lustrous look and polishing purposes. It is available in air tight packaging options to assure its safety during transit.
Our product Dewaxed Platina Shellac is processed and sold as dry flakes, which are dissolved indentured alcohol to make liquid shellac, which is used as a brush-on colourant, food glaze and wood finish. These are consistently checked on various quality parameters and are highly favored for their superior quality
Our Dewaxed Blonde Shellac is the best quality product with the long self-life shellac with impurity as below as 0.2% and used in pharma and food additives
Dewaxed Super Blonde Shellac is processed by using advanced techniques with Acid Value 60-80 MG KOH/G. This Shellac is mainly used as food glaze, wood finish and brush on colorant. We also offer Dewaxed Flake Shellac in different packaging options at reasonable rates.
Product can be customized according to Buyer’s Requirement
Product can be customized according to Buyer’s Requirement
Dewaxed Garnet Shellac is made available in different grades varying from color index to wax percentage of Acid Value 60-80 MG KOH/G. These products are available in wider specification and undergo certain checks to ensure the purity of this product. We are offering this product at affordable prices
Jute Braid, Packed Jute Rope, Jute Twine, Natural Jute Twine, Jute Twine, Jute Rope, Jute Twine
JUTE SACKS
Download Brochure
/ckfinder/userfiles/files/Jute%20Sacks.pdf
Jute Hessian Cloth
Jute Braided Rugs
Download Brochure
/ckfinder/userfiles/files/Jute%20Braided%20Rugs.pdf
Jute Bags
Download Brochure
/ckfinder/userfiles/files/ShreemoniExports_JuteBags.pdf
Lakadong Turmeric
Shreemoni Exports is always committed to export various grades of high-quality seedlac to our customers. We procure the raw materials from some of the best producers in the region, processing near the lac-growing sites to ensure maximum retention of the product. Efficient processing allows us to yield 40% to 60% conversion of the raw materials to finished product.
Godrej Henna Powder
Chia seeds, originating from Mexico and now cultivated worldwide, including India, have experienced increasing demand due to their health benefits and culinary versatility. In India, chia seeds have become popular among health-conscious individuals, fitness enthusiasts, and those with specific dietary preferences, thanks to their nutritional richness. They are known for containing omega-3 fatty acids, fiber, protein, antioxidants, vitamins, and minerals.
At Quessentials, we have the capacity to process approximately 600 metric tons of chia seeds monthly. Consistently achieving successful exports, we average around 300 metric tons per month. As a leading supplier and exporter of chia seeds from India, we hold a significant market share of 45%.
Chia seeds in India are primarily cultivated in states like Rajasthan, Gujarat, Maharashtra, Karnataka, and Tamil Nadu. These regions offer favorable climatic conditions, including warm weather and well-drained soil, which are ideal for chia cultivation.
SL.NO SPECIFICATION
| 1 | ASH | 6% Maximum |
| 2 | PURITY | 99.95% Maximum |
| 3 | TPC | 100.000 CFU/ G Max |
| 4 | YEAST & MOULDS | 10.000 CFU/ G Max |
| 5 | E.COLI | Absent in 1 Gram |
| 6 | SALMONELLA | Absent in 25 Gram |
| 7 | SHELF LIFE | 3 years from production date |
| 8 | SIZE | 1.5mm to 2mm |
| 9 | ODOR | Odorless |
| 10 | SHAPE | Flattened / Oval |
| 11 | OIL | 32% to 39% |
| 12 | MOISUTRE | 9% Maximum |
| 13 | PACKING | As per client requirement |
| 14 | LOADING CAPACITY | 20 MT / 20ft Container |
Saffron (popularly known as Kesar in India) is a dried stigma of the flower – Crocus sativus. In appearance, it is dark red in color and threadlike. The odor of saffron is pungent and it possesses spicy and slightly bitter flavor. The flowers of saffron are grown in France, Italy, Spain, India, the eastern Mediterranean region, and the Middle East. Saffron has wide use in culinary items.
Because of its difficult harvesting process and known benefits, the cost of saffron is very high. The regulation 2.9.15, lists the required specifications, to which Saffron shall conform.
However, the presence of floral waste i.e. yellow filaments that are unattached and separated pollens, stamens, parts of ovaries and other parts of flowers, is permitted up to 10 percent by weight. The Saffron powder shall be free from any extraneous matter or flo
| Floral waste, by mass | 0.5% max |
| Extraneous matter, by mass | 0.1% max |
| Flavour | characteristic of saffron, slightly bitter and pungent |
| Moulds, Insects, etc | free from living insects, mould growth, dead insects, insect fragments and rodent contamination |
| Presence of pigments and/or non-related organic matter | |
| Moisture and volatile matter, percent by mass, Max | Not more than 12.0 percent by weight (at 103 ± °C) |
| Total ash on a dry basis. | Not more than 8.0 percent by weight |
| Ash insoluble in dilute HCl on a dry basis. | Not more than 1.5 percent by weight |
| The solubility in cold water on a dry weight basis. | Not more than 65.0 percent by weight |
| The bitterness of the product is expressed as direct reading of the absorbance of picrocrocine at about 257 nm on a dry basis. | Not less than 30.0 percent by weight |
| Safranal is expressed as direct reading of the absorbance of 330 nm on a dry basis. | Not less than 20.0 percent by weight and not more than 50.0 percent by weight |
| The coloring strength is expressed as direct reading of the absorbance of 440 nm on a dry basis of the product. | Not less than 80.0 percent by weight |
| Total Nitrogen on a dry basis. | Not more than 2.0 percent by weight |
| Crude Fiber on a dry basis. | Not more than 6.0 percent basis by weight |
Sannam S4 Chilly or 334 Dry Chilly which is one of the most famous type of Chillies and has an overwhelming demand throughout the World Sannam Dried Red Chilli is one of the demanded varieties of red chilies and it is also known as 334. Sannam/S4, or Sannam Dried Red Chilli is produced by us on a very large scale. Out of 75% of the total Indian chilli crop, Sannam Dried Red Chilli is produced.
| Botanical name | Capsicum Annuum var. Longhum.334 |
| Style | Dried |
| Flavor | Medium spicy |
| Color | Red 40-50 ASTA |
| Hotness | 25000-35000 SHU 18,000 SHU – 22,000 SHU |
| Crop | Current Year |
| Quality | A/C Best |
| Origin | Andhra Pradesh |
| Moisture | 10% |
| Foreign material | 2% maximum |
| Loose Seeds | 3% maximum |
| Broken chilies | 5% maximum |
| Length | 8-11 cm |
| Breath | 1-1.5cm |
| MOQ | 5 MTS |
| Drying Process | Sun Dry |
RED CHILI FLAKES: SPECIFICATIONS
SHREEMONI EXPORTS supplies the best form of red chili pepper flakes all over the world to countries like USA and Europe. We can supply red pepper flakes to match variant hotness, color and flavour needs
| Product | Red Chili Flakes |
| Origin | Guntur, Andhra Pradesh, India |
| Moisture | 10% max |
| Hotness | 8000 max |
| Flake size | 2 to 4 mm |
| ASTA (color value) | 40 to 140 max |
| Total Ash | 8% max |
| Acid insoluble ash | 1% max |
| Non Volatile Ether Extract | 12% min |
| Sudan | 1, 2, 3&4, |
| Aflatoxin | 5 PPB |
| Discoloured | 1% max |
| Crop | New crop |
| Packing | 25kgs in PP bag |
Myristica fragrans is a dark-leaved evergreen tree cultivated for two spices derived from its fruit: nutmeg, from its seed and mace, from the seed covering. Nutmeg is the seed kernel of fruit-nutmeg, Mace is the dried "lacy" crimson-red covering or aril of the seed. It is a commercial source of an essential oil and nutmeg butter.
WHOLE NUTMEG: SPECIFICATION
| Product | Nutmeg Whole without shell |
| Origin | Kerala, India |
| Quality | ABCD |
| HS Code | 09081120 |
| Count | 21-22 / 100g |
| Colour | Natural grey |
| Moisture | 10% max |
| Admixture | 1% max |
| Volatile Oil | 3% Min |
| Extraneous Matter | 0.5% Max |
| Salmonella in 25g | Absent |
| Total Ash on dry basis | 3% max |
| Aflatoxin | 5ppm max |
| E-coli | < 10 cfu/g |
| Residual SO2 | Nil |
| Packaging | |
| Cartons | 10 kgs, 15 kgs |
| Jute Bags | 25 kgs, 50 kgs |
| New Crop Months | June to August |
| Product | Nutmeg powder |
| Origin | Kerala, India |
| HS Code | 09081120 |
| Count | 21-22 / 100g |
| Colour | Natural grey |
| Moisture | 10% max |
| Admixture | 1% max |
| Volatile Oil | 3% Min |
| Extraneous Matter | 0.5% Max |
| Salmonella in 25g | Absent |
| Total Ash on dry basis | 3% max |
| Aflatoxin | 5ppm max |
| E-coli | < 10 cfu/g |
| Residual SO2 | Nil |
| Packaging | |
| Cartons | 10 kgs, 15 kgs |
| Jute Bags | 25 kgs, 50 kgs |
| New Crop Months | June to August |
MUSTARD SEEDS POWDER
We have exporter of Mustard-Powder. Widely used as an ingredient in various types of dishes to enhance the taste, these powders are processed from the best quality mustard seeds. To attain complete client satisfaction, these powders are available in different packaging options.
Specification of Mustard Powder Grade wise:
| Mustard Powder | KGC-MP1 | KGC-MP11 |
| Moisture | 9%Max | 11%Max |
| Ash | 5% | 6% |
| Origin | India | |
| Shelf Life | 2 Years | |
| Packing | 25 Kg Pp Bag Or As Per Buyer Requirements |
Mustard Seeds are important herbs in many regional foods and may come from one of three different plants: black mustard (Brassica nigra), brown Indian mustard (B. juncea), or white mustard (B. hirta/Sinapis alba).
| Product | Mustard seed |
| I.T.C. H.S. Code | 120500 |
| Origin | India |
| Manufacturing | processed and packed under hygienic conditions |
| Colour | Fresh reddish brown dried small granules |
| Size | 1 to 2 mm |
| Type | Free from argemone seeds |
| Cleanlines | Machine cleaned |
| Flavour | Pungent characteristic taste |
| Purity | 99 % min |
| Moulds & Insects | 1% (m/m) max |
| Extraneous Matter | 0.7 % (m/m) |
| Damaged or shrivelled seeds | 2 % (m/m) |
| Pesticide residues | Within limit |
| Metallic contaminants | Within limit |
| Moisture | 9% max |
| Non-volatile ether extract | 27% min |
| Total ash | 6 % max |
| Acid insoluble ash | 1% max |
| Volatile oil content | 3 % max |
| Salmonella (in 25 g) | Absent |
| Packing | In moisture proof PP / jute bag / pouch |
| FCL | 20 Ft |
Fennel Seed Extract Powder
| Product | fennel seed extract powder |
| Product No. | KGC-FSP-111 |
| Grade | AAA |
| Features | No speckle, no mould. |
| Color | Natural green |
| Shelf life | 24 months |
| Admixture | 1% max |
| Shape | Whole, broken, powder(5-65 mash) |
| Moisture | 14% max |
| Certificate | Spices Board, APEDA. |
| Crop | Current Year |
| MOQ | 2 tons |
| Samples | Free or available |
Fennel Seeds
| Parameters | Value |
| Product Name | Fennel Seeds |
| Origin | India |
| Type | Machine Cleaned/ Sortex Cleaned |
| Purity | 99.85% / 99% / 98% (Europe / Singapore) |
| Extraneous Foreign Matter (% by Weight) | 0.50% Max |
| Whole Insects Dead (By Count) | 4 Max |
| Excreta Mammalian (By mg./lb) | 3 mg/lb Max |
| Excreta other (By mg./lb) | 5 mg/lb Max |
| Mold (% by wgt.) | 1% Max |
| Insect defiled/ infested (% by wgt.) | 1% Max |
| Total Ash | 10% Max |
| Acid Insoluble Ash | 1.25% Max |
| Flavor | Aromatic with a penetrating flavor |
| Moisture | 10% Max |
| Salmonella | Absent / 25 Gms |
Fenugreek powder
| Product | Natural Fenugreek Seed Powder |
| Item No. | KGC-FSP-111 |
| Grade | AAA |
| Features | No speckle, no mould, No heavy metal, no pesticide, Hand selected |
| Color | Natural light brown |
| Shelf life | 24 months |
| Admixture | 1% max |
| Shape | Whole, broken, crushed, powder(5-65 mash) |
| Moisture | 14% max |
| Certificate | Spices Board, APEDA, SHELAC. |
| Crop | Current year |
| MOQ | 2 tons |
| Samples | Free or available |
Fenugreek Seed
| Parameters | Value |
| Product Name | Fenugreek Seeds |
| Origin | India |
| Type | Sortex Cleaned/ Machine Cleaned |
| Purity | 99.5% / 99% / 98% |
| Total Ash | 9.5% Max |
| Acid Insoluble Ash | 1.25% Max |
| Flavor | Aromatic Sweet |
| Moisture | 6% Max |
| Salmonella | Absent / 25Gms |
Fenugreek Dry Leaf
| Product Code | 10FG |
| Ingredient Declaration Fenugreek Leaf | Ingredient Declaration Fenugreek Leaf |
| Flavour and Odour | Strong smell and bitter taste, characteristic to Fenugreek |
| Appearance | Bright green to mid-dark green rubbed leaves |
| Country of Origin | India |
| Particle Size | 0.5mm – 3mm |
| Extraneous Matter | % <2 |
| Metal Detection (minimum) | Ferrous 1.0mm Non-Ferrous 1.5mm Stainless Steel 3.0mm |
| Moisture | % <8 |
| Total Ash | % <17 |
| Acid Insoluble Ash | % <4 |
| Pesticides & Heavy Metals | Meets EU regulations |
| E Coli /g | <100 |
| Salmonella /25g | Negative in 25g |
HALAL, ISO & FDA Approved
BROCHURE
/ckfinder/userfiles/files/Shreemoni%20Exports_JK%20CATALOGUE(1).pdf
HALAL, ISO & FDA Approved
SPECIFICATION OF RED CHILI POWDER (HALAL, FDA & ISO APPROVED)
SHREEMONI EXPORTS source the finest quality chili powder and export across the globe in all quantities and also supply on container basis according to the customer requirements
| Product | Red Chili Powder |
| Origin | Guntur, India |
| Colour | Bright red |
| Appearance | Reddish orange granular powder |
| Size | 40 to 60 Mesh |
| Spiciness | Red |
| Moisture | 8% Max |
| Pungency in SHU | 8,000-1,00,000 (Heat) |
| Shu (ASTA Method) | 15,000 – 90,000 |
| Color (ASTA Method) | 40 – 160 |
| Sieve Size | 20 – 60 mm |
| Crop | New Crop |
| Crude Fibre | Less Than 30% |
| Grade | A |
| Quality | Best |
| Variety | Kashmiri/Teja / S17, Baydgi, 334/ S4,/341,DD and Endo |
High Carbon Ferro Chrome (HC FeCr)
Cr 60 – 65 % min 60 – 65 % min 60 – 65 % min 60 – 65 % min
Si 1.5 % Max 2% Max 3 % Max 3.5 % Max
C 9 % Max 8.8 % Max 8.25 % Max 8 % Max
P 0.04 % Max 0.035-0.04 % Max 0.035-0.04 % Max 0.035-0.04 % Max
S 0.05 % Max 0.05 % Max 0.05 % Max 0.05 % Max
Size: As per customer’s request
Packing: Loose in Bulk or in 1MT Big Bags as per customer’s request
Flow Wrapping Machine is an invention which makes processing of sealed cups faster. This machine is used to pack dairy products and edible items. Vffs, which implies that not only does the machine will fill up the cup with an appropriate amount of product but it also seals the container in which the product has been filled.
Vffs machine is an invention which makes processing of sealed cups faster. This machine is used to pack dairy products and edible items. Vffs, which implies that not only does the machine will fill up the cup with an appropriate amount of product but it also seals the container in which the product has been filled.
Candy pillow packaging machines are used to pack candies in small size packets that look similar to pillows. The packaging mechanism is not quantitative by weight or volume but in numbers which implies that the machine determines the number of candies that are to be filled in a packet. Pillow packing generally encloses one candy.
This machine rapidly packs candies and manual labor stands no chance of matching its productivity. It fills and packs up to 350 pieces of candies each in a packet in a minute. This number can certainly vary depending on the several factors involved in packing but in any scenario it is never less than 250. The productivity of this machine is commendable. This machine not only saves time of the user but also saves monetary resources which results to a direct profitability for user.
The use of this machine does not compromise with the hygiene of packing edible products. Candy pillow packing machines are developed in such a way as to avoid any sort of contamination. The point of contact is made of stainless steel and neither the candy nor the wrapping material is exposed to any sort of foulness. This machine also mitigates wastage of the product to a great extent and any product that is left unpacked can be repacked.
Horizontal Flow Wrapper Machine is used for packaging a number of products. This machine can be used for products of all shapes be it rectangular, triangular, cubical or square. Some of the products include cakes, chocolates, noodles and biscuits. Supporting the latest technology, this machine is the best industrial product in the market now. The servo motor support is one of its best features. The operations take place smoothly with the working interface which is extremely user friendly. The pouch can be changed or replaced as per the requirements.
With high performance level and less restrictions while using it, the machine has become all the more efficient in delivering its performance. The machine control is PLC based i.e. Programmable Logic Control. This quality makes the machine more flexible as the inputs can be changed at any point of time and that to be without any hassle. Manufactured with all the required industrial standards, the horizontal flow wrap machine has been analyzed with utmost carefulness. The precision of the quality of output is unmatched. This is a construction which is vibration free, hence sturdy. All the electrical components used have passed through stringent tests, making sure they are absolutely safe to use for a number of years. This machine also comes with a feature of emergency stop; implies, if there is anything you would like to change post the operation, you can simply press that button and restart the entire process again.
The feeding system is manual whereas the temperature of the machine can be controlled. The easy and comfortable installation and maintenance of this machine is being very well appreciated by the users.
Features:
Packaging machines are used to fill and pack liquids in pouches. These machines fill exact amount of required volume of liquid in the packets and package them for sale. Water packing machines are meant for packing liquid products that are fast moving consumer goods (FMCG) which implies that they are fast in the process. These machines can fill pouches with capacities of volume ranging widely. These machines are also capable of packaging pouches and packets of various shapes to name a few- four side seal pack, four side seal pack with V notch, kite shape pack with tear notch and standee pouch with cap. Liquid packing machine is programmed to pack all sorts of pouches and packets.
This machine is majorly used by dairy product manufacturers and packers and hence hygiene and contamination free processing is an essential requirement. These machines are capable of doing the needful without exposing the product to a potential contamination.
Thus, consumers are guaranteed of safe products while the user of the machine can be worry free. The machine is profitable and time saving for the user. It can pack more than 20 packs in a minute thus increasing productivity and replacing manual labor which is far more expensive and less productive. Water packing machine manufacturers make sure that every component in the machine is flawless and long lasting to cause least hindrance in production while the machine is functional. The raw material used in manufacturing the machine is also of the best grade and steel is used in most of the components.
We provide you with high quality oil packing machine which has been constructed adopting the latest technology. The components of this machine are made up of stainless steel which makes the machine durable, robust and resistant to corrosion. This machine is frequently used in packaging of shampoo, oil and ghee among innumerable products. This fully automatic Oil Packing Machine is available in single head and double head versions. Also, it is available in center sealing and side sealing.
The machine comes in two versions, Mechanical and Pneumatic version. This availability of choice is beneficial for all the users as some might prefer to operate it manually while others might like to handle the pneumatic version of the very same machine. The filling of the product may be done either by Gravity filling or by Volumetric Piston filler; any one of the two methods can be chosen as both are super comfortable to operate and access. The oil packing machine has huge requirement and following this huge demand, these machines are being produced in bulk; but even then the quality and efficiency has not been compromised with. This machine can be used in a number of industries. It works smoothly when in operation mode, no matter for how long it is put into use.
Available at affordable prices, the oil packing machine makes work a child's task to be performed by any person. A team of professionals have constructed this machine and have given due attention to the minutest details as well. Their expertise has made this machine stand out. To endow the machine with their experience, they have put in all their efforts. Also, the machine has been tested before getting finalized.
Features:
Kurkure is a very famous snack that is loved by children and adults all alike throughout the country. It is a light snack that comes packed in air fluffed packets. Each of these packets are filled with exact same amount of Kurkure and packed using the Kurkure packaging machine.
These machines speed up the packing process with error free accuracy. Each machine can pack 20-25 packets in a minute. They can also be used for various sizes of pouches and packets. The machine not only weighs and packs the product but it also snips each pouch or packet from the line and seals the pack after filling it up.
Since the machine is used only for packing food products it is essential that the components of the machine do not cause any sort of contamination to the product or any wastage. This machine is efficient enough to avoid both of these unwanted situations. The electronic components of this machine are reliable and are of good quality that last long.
Kurkure packing machines are also built with sturdy and long lasting electrical and mechanical components for ease in maintenance and service. These machines are also programmed to cause least wastage of the product which also helps in keeping the area around the machine hygienic. These machines are very efficient and are used all over the country.
Namkeen is the Indian term for snacks. Namkeens are particularly Indian snacks that are enjoyed with evening tea or with breakfast. Namkeens can of course be found in every kitchen. Namkeens are packed in air flushed packets and the machine responsible for the packaging is called namkeen packing machine.
Since the machine is used only for packing snacks products it is essential that the components of the machine do not cause any sort of contamination to the product or any wastage. This machine is efficient enough to avoid both of these unwanted situations. The electronic components of this machine are reliable and are of good quality that last long. Maintenance and servicing of this machine is also quiet convenient.
This practice helps manufacturers in an easy maintenance and servicing as well as it helps users in mitigating sudden breakdown of machine. Several precautionary measures are also employed to avoid any sort of problem that may be caused to the circuit of the factory due to malfunction of the electrical components of this namkeen packing machine.
It also mitigates the need of using already prepared packets and uses lines printed packing material thus proving to be resourceful for user.
This quality Collar Type Servo Auger Machine is used to fill powder and semi powder. All the powders such as milk powder, spice powder, food powder and soap powder can be filled into packets using this machine. This machine has been manufactured by professionals with optimum efficiency and accuracy. Available at competitive prices, it has adjustable fitting parts for varying volumes. These volumes can be varied and controlled by servo motor. It minimizes manual work to a great extent.
The collar type servo auger machine works very smoothly. The components used to fabricate the machine are of prime quality. There are optional attachments available in the package like screw feeder for feeding material in the main hopper. It adds to the versatility of this machine. The robust and sturdy machine helps the products to be durable and attain long operational life. Qualitative array of pouches is received from this machine. This machine is flexible and is highly useful. This machine is very easy to maintain, making the work even easier for the user.
As every pouch is made ready independently, every pouch is picture perfect in itself and the ingredients never get mixed. The pouches remain neatly filled with the specified powder only. This is a specific packaging machine and has been used by our clients for long now. Also, the easy functionality of this machine creates high demand for it in the market. Its widespread applications have aided in the increase its demand. The entire machine goes through a number of tests before it is actually finalized for sale. Every single level of manufacturing process is being scrutinized by a panel of experts, making the required changes wherever and whenever needed.
Features:
Besan is Indian colloquial for gram flour. Basen is made out of ground chick peas or gram and is used in several Indian recipes and it is a common Indian kitchen commodity and can be considered a fast moving consumer good. This implies that its packing must be at a fast rate. Besan packing machine comes in handy in this situation for the manufacturers. This machine packs besan in apt packets which are generally plastic pouches. The machine weighs the product and fills it in packets as well as seals the packets.
The product is weighed according to the pre programmed input and is rapidly filled and packed. Each besan packing machine fills and packs almost 20-25 packets in a minute. The machine is a lot faster than manual labour and is also precise and accurate in weighing and filling product in packets. The chances of error in its functioning are slim to none. Using this machine also leads to a hygienic processing of product and mitigation of wastage.
This machine is appropriate for business setups that require fast production and in time supplying.
In order to meet the certain packaging requirements of the food items, the collar type machine manufactures designed a wide variety of machineries. These machines are manufactured using the superior quality components as well as modern technology to ensure that it is in line with the industry standards and requirement. High durability, superior performance, compact design and robust construction are some of the features of these machines.
These machines are most generally used to package packets of namkeens, chips, cookies etc. owing to its high efficiency and ease of operation, the product is hugely demanded among people from different industrial and commercial sectors. These types of machines are easily available in standard as well customizable range and have been equipped with the best components.
This quality Collar Type Servo Auger Machine is used to fill powder and semi powder. All the powders such as milk powder, spice powder, food powder and soap powder can be filled into packets using this machine. This machine has been manufactured by professionals with optimum efficiency and accuracy. Available at competitive prices, it has adjustable fitting parts for varying volumes. These volumes can be varied and controlled by servo motor. It minimizes manual work to a great extent.
The collar type servo auger machine works very smoothly. The components used to fabricate the machine are of prime quality. There are optional attachments available in the package like screw feeder for feeding material in the main hopper. It adds to the versatility of this machine. The robust and sturdy machine helps the products to be durable and attain long operational life. Qualitative array of pouches is received from this machine. This machine is flexible and is highly useful. This machine is very easy to maintain, making the work even easier for the user.
As every pouch is made ready independently, every pouch is picture perfect in itself and the ingredients never get mixed. The pouches remain neatly filled with the specified powder only. This is a specific packaging machine and has been used by our clients for long now. Also, the easy functionality of this machine creates high demand for it in the market. Its widespread applications have aided in the increase its demand. The entire machine goes through a number of tests before it is actually finalized for sale.
Features:
Semi Pneumatic Auger filler machine is an automatic ingenuity used to fill powder products in substance containers. These containers can be a bottles or pouches of various sizes. The substance that is filled in containers can either be free flowing or non free flowing. Auger filler machine also known as powder dozing machine is apt for filling bottles, cans, jars or tubs with a capacity ranging from 1gm to 5000gm of any powder. The machine is a practical example runs of volumetric filling principle.
Features:
FFS auger filler machine is an invention which makes processes the filling and packing of auger products faster. This machine is used to pack powder or powder like substances most of which are edible items. FFS stands for form fill and seal, which implies that not only does the machine will fill up the packet with an appropriate amount of product but it also seals the container in which the product has been filled. The machine fills up each container with a precise amount of product and uses volumetric measurement mechanism to achieve the needful. The products that are filled and packed in packets using this machine are majorly edible products. Some of the examples of the products are wheat flour, gram flour, nutritional powders, chocolate powder etc.
Since the machine is used for packing food items it is important that it is made of material that is non- contaminant and inert to human physiology. The machine is manufactured out of best grade of raw materials. The parts of machine where food comes in its contact is made of food grade steel as per FDA norms. It is crafted in such a way which makes it easy to clean and use.
FFS auger filler machine fills and packs containers rapidly. It packs 20-30 packets in a minute. It first fills up the packs with the appropriate amount of product and later on seals the pack.
The packaging machines are the machinery which completes the stages of the entire packaging process. The major reason as to why this is used is because it increases the efficiency of the whole packaging process as well as reduces the labour costs effectively. The biscuit packing machine manufacturers especially design these machines for packing different kinds of biscuits. Machinery for packing different sizes like 200gm, 300gm, 400gm or 500gm are quite popular.
The machines are most suitable for shapes like square, rectangle and round. The biscuits at first are fed into three hopper. The arrangement of automatic puncher feeding takes the necessary biscuit pack length and then pushes the biscuits rather smoothly into the main feeding conveyor. After this process is complete, a steel rod carries all the biscuits through an adjustable folding box with the biscuit paper. The final sealing and cutting is completed by the rotating how jaw.
Packaging is required in order to protect the products from damage. When the products are packaged with the help of the machines, the quality is maintained. Also, the speed is much faster as compared to that of manual packaging.
Collar type cup filler machine is a packing machine used for filling and packing of cups. It has a collar type structure hence the name. It has several advantages primary of which is low wastage of product.
The raw material used in manufacturing the machine is of the best quality. It is also manufactured using the best quality of electrical components that undergo several tests before they are used in the machine. This practice helps manufacturers in an easy maintenance and servicing as well as it helps users in mitigating sudden breakdown of machine.
Every machine is equipped with an emergency stop button to stop the production instantaneously in case of an unlikelihood. Collar type cup filler machine is far more productive as compared to manual labor. Each machine fills up and packs 20-25 cups in a minute. The machine is also flawless in its functioning. The wastage percentage is very low and the quality of packing is consistent for every pack.
Here is a list of benefits this machine offers:
Pneumatics is the branch of engineering that implies use of compressed gas for various mechanical and non-mechanical processes. Semi pneumatic cup filler machine is used to fill and pack cups. This machine uses volumetric cup filler system to fill the container with exact amount of product.
This machine pressurizes the container before packing it, with compressed air. Compressed air is used because a sustainable supply can be made by compressing atmospheric air. The air used has moisture removed while a small amount of oil is added to compressor. This prevents corrosion and helps in lubrication of mechanical components.
Pneumatic systems have several advantages. Here are a few prominent advantages:
FFS cup filler machine is an invention which makes processing of sealed cups faster. This machine is used to pack dairy products and edible items. FFS stands for form fill and seal, which implies that not only does the machine will fill up the cup with an appropriate amount of product but it also seals the container in which the product has been filled.
The machine fills up each container with a precise amount of product and uses volumetric measurement mechanism to achieve the needful. The products that are filled and packed in cups using this machine are majorly dairy and edible products. Some of the examples of the products are yogurt, ice-cream and packaged water.
Since the machine is used for packing food items it is important that it is made of material that is non-contaminant and inert to human physiology. The machine is manufactured out of best grade of raw materials. It is crafted in such a way which makes it easy to clean and use.
FFS cup filling machine fills and packs containers rapidly. It packs 20-30 cups in a minute. It first fill up the cup with the product and later on a sheet of plastic is pressed on the cup which is sealed off due to pressure and temperature.
The machine is used to majorly pack fast moving consumer goods which imply that it is used at least 12 hours a day. For a long life of the machine it is important that every component is put together sturdily to avoid any unwanted breakage during its use.
Packaging is a rather important part of business and one of the essential factors in the sale of the products. Good packaging makes the product appear more attractive it is for this reason that the manufacturers require superior pouch packing machines. There are several kinds of packaging machines which are available in various models. One can buy the kind that suits their need the most.
Each of the machines is specifically suitable to wrap the product in a certain style or way. It is for this reason that the machines produced by the manufacturers are highly in demand and also have the potential for prospective development. The packaging machines are highly favoured by companies as they improve the efficiency, reduce the labour charges as well as provide better working conditions. The two major types of pouch packing machines are semi-automatic and automatic packing machine. The automatic machine is more popular for its ease of usage.
Most of these machines are made up of stainless steel are approved of the standard. All of these machines are reliable and accurate which ensures that there is minimum or no wastage.
Driven by electromagnetic guideline, this Foil Sealing Machine we offer is utilized for water/air proof fixing of PET, LDPE and different evaluations of plastic made jugs or holders. This machine utilizes twofold layered inward seal to make the holder absolutely spillage verification. It comprises of hardened steel container, ground-breaking generator, superior fixing head, single stage engine and variable speed transport. Simple to work, this machine spares venture cost. Vitality productive activity, low commotion and vibration level, inconvenience free establishment, durable development, exact measurement, rust evidence structure and moderate cost are its principle highlights. We offer Foil Sealing Machines in cost effective valuing.
| Power Requirement | 1.75kW |
| Machine Speed | Upto 60 Bottles/Minute (depending upon the size of the bottles) |
| Used For | Nutraceutical Bottle, Chocolate Powder Bottle, Milk Powder Bottle, Pickle Bottle, Ghee Bottle, Cosmetic Bottles, Jam Bottle, Syrup Bottle, Jelly Bottle etc. |
We have been engaged in exporting and supplying a wide range of Balm Filling Machine. The offered machine is manufactured by our skilled professionals using quality examined components at advanced production unit. This machine is widely used for filling paste like iodex, balm etc. in bottles. In addition to this, the provided lip balm filling machine can be bought from us in several specifications at industrial leading prices.
We have been engaged in manufacturing, exporting and supplying a wide range of balm filling machine. The offered machine is manufactured by our skilled professionals using quality examined components at advanced production unit. This machine is widely used for filling paste like iodex, balm etc. in bottles. In addition to this, the provided lip balm filling machine can be bought from us in several specifications at industrial leading prices.
Having rich domain knowledge and experience, we have been engaged in manufacturing, exporting and supplying excellent grade range of Sticker Labeling Machine. The offered machine is manufactured using quality approved components by our diligent professionals with the help of pioneering techniques. This machine is used for sticker labeling on bottles, jars and containers. Additionally, clients can purchase the provided Sticker Labeling Machine from us at the most suitable rates.
Having rich domain knowledge and experience, we have been engaged in manufacturing, exporting and supplying excellent grade range of Sticker Labeling Machine. The offered machine is manufactured using quality approved components by our diligent professionals with the help of pioneering techniques. This machine is used for sticker labeling on bottles, jars and containers. Additionally, clients can purchase the provided Sticker Labeling Machine from us at the most suitable rates.
| Machine Dimension | 700x1500x1500 |
| Machine weight | 300kg |
| Power Requirement | 1HP – 220V |
| Machine construction | SS304 |
| Filling Size | 12mm to 65mm |
| Machine Speed | 80 to 100 bottles/minute |
| Machine Dimension | 1100x1800x1500 |
| Machine weight | 300kg |
| Power Requirement | 2HP – 220V |
| Machine construction | SS304 |
| Filling Size | As per requirement |
| Machine Speed | 80 to 100 bottles/minute |
We give Shrikhand Cup Filling Machine to numerous ventures including nourishment, dairy, and beauty care products. These machines are intended to fill, seal, and cover your items into stackable compartments.
We give Shrikhand Cup Filling Machine to numerous ventures including nourishment, dairy, and beauty care products. These machines are intended to fill, seal, and cover your items into stackable compartments. They are completely programmed and can convey up to 50 glasses for every moment per path. The whole line of container machines comes outfitted with cutting edge configuration highlights to ensure items are bundled to your details unfailingly. The Shrikhand Cup Filling Machine is reasonable for filling Pasty material with or without strong issues in hot or chilly conditions like water, Pudding, ketchup, Cream Cheese, Jelly, Beverages, Lassi, Butter drain, Bean curd, Yogurt, Shrikhand, Honey, Jams, Paints, Oils and other comparative materials.
We have been instrumental in exporting and supplying quality assured range of Screw Capping Machine. The offered machine is manufactured using the best grade components under the supervision of our deft professionals. The provided machine is widely used for air tight capping of bottles and other similar items in various industrial and commercial places. Additionally, this Screw Capping Machine can be bought from us
Backed with rich industrial experience and knowledge, we have been instrumental in manufacturing, exporting and supplying quality assured range of Screw Capping Machine. The offered machine is manufactured using the best grade components under the supervision of our deft professionals. The provided machine is widely used for air tight capping of bottles and other similar items in various industrial and commercial places. Additionally, this Screw Capping Machine can be bought from us at budget friendly rates.’
FOB Port : Ahmedabad
Supply Ability : As per customer requirement Per Week
Delivery Time : As per customer requirement
Packaging Details : Wooden Packing
Certifications : D & B, ISO 9001:2008
Jar Filling Machine
With rich domain expertise in this field, we have been instrumental in exporting and supplying high quality range of Jar Filling Machine. The offered machine is manufactured under the supervision of our dexterous professionals using quality examined components with the aid of sophisticated techniques. This machine is widely used for filling fluids and paste in jars in several industrial places. The provided Jar Filling Machine can be bought from us at market leading prices.
Description
Jar Filling Machine
Key Points of Jar filling machine
| Machine Dimension | 800x1500x1850 |
| Machine Head | Upto 24 Heads |
| Machine weight | 300kg |
| Power Requirement | 5kw |
| Air requirement | 6kg |
| Filling volume | 5gm to 1000gm with the help of change parts |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | Upto 240 jars/minute (Depend Upon Filling Material) |
| Machine Dimension | 500x600x1500 |
| Machine Head | Single OR Double |
| Machine weight | 300kg |
| Power Requirement | 9kw |
| Air requirement | 6kg |
| Filling volume | 5gm to 1000gm with the help of change parts |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | Upto 50 bottles (Depend Upon Filling Material) |
With the help of advanced production unit, we have been betrothed in exporting and supplying quality checked array of Grease Filling Machine. The provided machine is manufactured by utilizing premium grade components under the observation of our skilled professionals. This machine is widely used for filling grease and other related products in bottles. Apart from this, the offered Grease Filling Machine can be purchased from us in several specifications
We are a renowned firm in this field, affianced in exporting and supplying the best grade range of Chyawanprash Filling Machine. The offered machine is manufactured by our skilled professionals using quality tested components with the aid of modern techniques. Finding its applications in pharmaceutical, food processing and beverages industries, this machine is ideally used for filling chyawanprash in bottles. In addition, the provided Chyawanprash Filling Machine can be purchased from us
Paste Filling Machine
With an aim to become top entity in this domain, we have been engaged in exporting and supplying a quality approved Paste Filling Machines. These machines are widely used in cosmetic, pharmaceutical, food and beverage industries for filling paste, Cream, liquids and other viscous materials. The provided machine is manufactured by our ingenious professionals using premium grade components. Furthermore, clients can buy this machine from us.
Paste filling machine to fill paste type products like garlic paste, onion paste Ointment catch ups etc. in bottles or containers
| Machine Dimension | 800x1500x1850 |
| Machine Head | Upto 24 Heads |
| Machine weight | 300kg |
| Power Requirement | 5kw |
| Air requirement | 6kg |
| Filling volume | 5gm to 1000gm with the help of change parts |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | Upto 240 jars/minute (Depend Upon Filling Material) |
| Machine Dimension | 500x600x1500 |
| Machine Head | Single OR Double |
| Machine weight | 300kg |
| Power Requirement | 9kw |
| Air requirement | 6kg |
| Filling volume | 5gm to 1000gm with the help of change parts |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | Upto 50 bottles (Depend Upon Filling Material) |
Multi Head Tube Filling Machine
Fostered with sound industry knowledge, we have been able to export and supply Multi Head Tube Filling Machine to our clients. Precisely engineered using high quality raw material, this machine is used to fill viscous products like paste, ointment, jars etc. in very small containers.
Designed in sync with the international quality standards, this Multi Head Tube Filling Machine is widely accepted all across the world due to its efficient performance, robust construction, a long functional life, and fast operation
| Machine Dimension | 1200x2100x1850 |
| Tube diameter | 12.5mm to 50mm |
| Machine weight | 900kg |
| Power Requirement | 9kw |
| Air requirement | 6kg |
| Chilled water requirement | 50C chilled water |
| Filling volume | 3gms to 250gms |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | 60 to 80 tubes/minute |
Tube Filling Machine
With years of experience and knowledge in this industry, we are exporting excellent range of Tube Filling Machine. Our filling machine is high on demand in the market due to its excellent functionality. Our filling machine is developed with the latest technology & top quality components in compliance with the standard of the industry. Our valuable clients can avail this filling machine from us in various specifications within a given time frame.
Description
Tube Filling Machine Details:
| Minimum Order Quantity | 1 Unit |
| Machine Type | Automatic |
| Voltage | 230/440 |
| Pressure | 6 KG |
| Material | SS 316 |
| Dimension | 800X1400X1600HEIGHT IN MM |
| Weight | 500KG |
| Model Number | BEW 40 |
| Tube Size | UPTO 50 DIAMETER |
| Shape | ROUND |
| Hopper Material | SS 316 |
| Storage Hopper | 40KG |
| Tube Diameter | UPTO 50 DIAMTER |
| Nozzle | SINGLE AND DOUBLE |
| Phase | SINGLE & THREE PHASE |
| Tube Shape | ROUND |
| Accuracy | 1% |
| Motor | 1HP |
| Filling Range Gm | 3 GRAMS TO 250GRAMS |
| I deal in | New Only |
| Hand Operated | No |
| Packaging Type | Plastics Tubes, Metal Tubes |
| Capacity | 30 – 70 Tube / Minute |
| Power Consumption | 3kW |
| Brand | BHAVANI |
| Filling Speed | 30 TO 40 TUBES PER MINUTES |
| Color | ANY |
Semi Automatic Tube Filling Machine
Semi-automatic tube filling machines are generally used for small to medium scale production needs. They are suitable for filling almost any liquids like fragrances, syrups, viscous products, liquids with particles, adhesives etc. These Machines are incorporated with the housing of filling device and syringe pump, which is being provided with the rotary piston. Manufactured using high-grade components, these machines have a high speed of filling maximum 50 tubes in one minute. Furthermore, these come with stainless steel spring that is attached with changing parts in a single tube size.
Features of Semi Automatic Tube Filling machine
| Machine Dimension | 800x1300x1800 |
| Tube diameter | 12.5mm to 50mm |
| Machine weight | 500kg |
| Power Requirement | 4.5kw |
| Air requirement | 6kg |
| Chilled water requirement | 50C chilled water |
| Filling volume | 3gms to 250gms |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | 30 to 40 tubes/minute |
Multi Head Linear Tube Filling Machine
Product Feature
| Machine Dimension | 1450x2800x1800 |
| Tube diameter | 12.5mm to 40mm |
| Machine weight | 1500kg |
| Power Requirement | 9kw |
| Air requirement | 6kg |
| Chilled water requirement | 50C chilled water |
| Filling volume | 3gms to 250gms |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | 110 to 120 tubes/minute |
Linear Tube Filling Machine
We have been consistently betrothed in exporting and supplying a premium range of Linear Tube Filling Machine. The offered machine is manufactured under the guidance of our diligent professionals using optimum grade components at our advanced production unit. Finding applications in pharmaceuticals and chemical industries, this machine is widely used to fill fluid in tubes, jars etc. In addition to this, the provided Linear Tube Filling Machine can be bought from us in bulk
Linear Tube Filling Machine
Key points of Tube Filling Machine
| Machine Dimension | 1200x1800x1850 |
| Tube diameter | 12.5mm to 40mm |
| Machine weight | 1100kg |
| Power Requirement | 7kw |
| Air requirement | 6kg |
| Chilled water requirement | 50C chilled water |
| Filling volume | 3gms to 200gms |
| Machine construction | SS304 |
| Filling Construction | SS316 |
| Machine Speed | 60 tubes/minute |
Automatic Tube Filling Machine
With the assistance of our master workforce and most recent machines, we can produce and supply a quality scope of Automatic Tube Filling Machine. This machine is utilized for filling LDPE and HDPE tube with various materials. In pharmaceutical industry this machine is exceedingly used. To follow most recent innovation, we utilize ideal review cast press and mellow steel to fabricate this machine. Our items are anything but difficult to work and high in operational familiarity. We offer this Fully Automatic Tube Filling Machine at practical costs to customers.
Automatic Tube Filling Machine Features:
| Packaging Type | Plastics Tubes, Metal Tubes, Laminated tubes |
| Filling Speed | 40 TO 50 TUBES PER MINUTES |
| Capacity | 40 TO 50 Tube / Minute |
| Filling Range | 5 GRAMS TO 250 GRAMS |
| Number Of Heads | 1 |
| Power Consumption | 3kW |
| Machine Type | Automatic |
| Voltage | 220 / 440 |
| Pressure | 6 KG |
| Color | ANY |
| Spice | Indian Green Cardamom, |
| ITC HS Code | 09083130 |
| Origin | Kerala, India |
| Colour | Deep green, fast green |
| Size, Diameter | 6 mm, 6.5 mm, 7mm, 7.5 mm, 8 mm |
| Taste and Aroma or Flavour | characteristic and fresh |
| Shrivelled Capsules | 2% max. |
| Blacks and Splits | Nil |
| Blacks and Splits | 10 % max. |
| Total Ash | 2% max. |
| Acid Insoluble Ash | Nil |
| Moulds, Insects, etc | 2% max. |
| Foreign Matters | 5% by count |
| Immature Cardamom | Nil or 3 by count |
| Thrips | 385-450 gm/lit |
| Density | None |
| FDA DALs | 10 % max |
| Moisture Content | 3 % min. |
| Volatile Oil Content | 3 % min. |
| Extraneous Matter | 0.5 % max. |
| Salmonella in 25g | Absent |
| E. Coli | <10cfu/g |
| Empty and Malformed Capsules | Nil |
| Inspection | SGS or any other agency as per buyer’s need |
| Mode of Payment | T / T, LC |
| Delivery | within 20 days from the date of receipt of Confirmed Purchase Order & Receipt of Advance. |
| Product | KUSHUMI MINI BUTTON LAC |
| Strain | Kushumi |
| Hot alcohol insolubility | limit – Basic 3%, Relaxed 5 |
| Water solubility | 1% |
| Colour Index | 18 max |
| Volatile matter | 2% max |
| Wax | 5% |
| Rosin | Present |
| Ash | 0.5% |